HoMedics WGNBPA-960BT User Manual - Page 7

INSTALLING BATTERIES 1. Press foward on latch and lift the battery cover to open the battery compartment. 2. Install or replace 4 "AA­" sized alkaline batteries in the battery compartment according to the indications inside the compartment. 3. Close the battery cover by pushing in the top end of the battery door. Battery Cover Replace the batteries if: • The weak battery symbol appears. • When any button is pressed and nothing is displayed on the screen. Note:  • If the batteries are removed or replaced, the date and time will need to be re-set either manually or automatically using your Bluetooth mobile device. • Replace all batteries at one time (as simultaneous set). Use only 1.5V "AA" alkaline batteries. • When the batteries are removed, the measurement values are retained. • Remove batteries when unit is not in use for extended periods of time. • Clean contacts on battery and in battery compartment with a soft dry cloth each time you install batteries. • Batteries are hazardous waste. Do not dispose of them together with the household garbage. 11 USING THE AC ADAPTER 1. C onnect the AC adapter with the AC adapter jack as shown below. 2. Please use only the AC adapter included with this monitor. Note:  • When the AC adapter is your main power supply, make sure the adapter plug can be easily removed from the unit. • Please unload the batteries when operating with an AC adapter for an extended period of time. Leaving the batteries in the compartment for a long time may cause leakage, which may lead to damage to the unit. • No batteries are needed when operating with an AC adapter. • Date and time will need to be reset if AC adapter is unplugged and unit is without batteries. ON OFF Triple Check ON OFF Rest Assure AC Adapter Input: 100-240V~0.18A-0.20A 50/60Hz Output: 6V DC 1A 6W Max Connect AC adapter here 12