Honeywell 17005 Owners Guide - Page 4
Intelli-Check, Filter Indicator: Model 17000, Reset Filter Indicator/Turn Light Off: Model 17000, - replacement filter
UPC - 090271170052
View all Honeywell 17005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Operation: Model 17000 LOCATE PRE-FILTER IN THE BOX AND INSTALL BEFORE INITIAL OPERATION. Refer to "Removing/Changing the Filters" section for proper installation. • Ensure the air purifier is plugged into a working electrical outlet. • Allow the unit to operate for a few seconds at HIGH speed, then set the unit to HIGH or MEDIUM for faster, more powerful room cleaning, or press the LOW button for quieter operation. It is recommended you run your air purifier 24 hours a day to ensure continuous cleaning. Portable air purifiers are more effective in rooms where all doors and windows are closed. Intelli-Check™ Filter Indicator: Model 17000 The Intelli-Check™ Filter Indicators serve as a convenient guideline for when to clean the LifeTime HEPA™ Permanent Filter and when to replace the carbon pre-filter. Depending upon your individual usage (environment and hours used), you may need to clean/replace the filters more or less frequently. When the HEPA Filter Indicator Light turns on, it's time to clean your HEPA filter. The Intelli-Check™ reminder for when to clean the HEPA filter is intended as a guideline only as the performance of the filter media is dependent on the concentration of the contaminants to which the system is exposed. If there are sources of large amounts of contaminant generation (such as dust from woodworking or heavy smoking) the HEPA filter in your air purifier may need to be cleaned more often. For instructions on how to clean your HEPA filter, refer to section "Cleaning the LifeTime HEPA™ Permanent Filter" in this manual. When your Pre-filter Indicator Light turns on, it's time to replace your pre-filter. It should be replaced at least every 3 months. If there are heavy concentrations of odors, smoke, or large particles in the home, you may need to change the carbon pre-filter more often. For instructions on how to replace your pre-filter, refer to section "Removing/Changing the Filters" in this manual. Note: We do not recommend operating the air purifier without the carbon pre-filter. Reset Filter Indicator/Turn Light Off: Model 17000 To Reset Filter Indicator Fig 1 • Once the filter has been checked and cleaned or replaced as needed, the filter indicator will need to be reset. • With the unit powered on, press and hold the appropriate filter indicator button down for approximately 10 seconds until the light turns off (Fig. 1). 4