Honeywell 17005 Owners Guide - Page 6

Customize Program Cycles: Model 17005 NOTE: The air purifier cannot be programmed unless it is plugged into the outlet. To SET program points: Press the SET button and hold for 3 seconds to activate time function. The SET button will move through these programming functions: Set (current) TIME. Set PG1 cycle times P1-ON and P1-OFF. Set PG2 cycle times P1-ON and P1-OFF, and P2-ON and P2-OFF. Set EXIT mode and Run the clock. To Customize the PG1 Program Settings to run ONE ON/OFF Cycle in a 24 hour period: NOTE: You are unable to set the OFF time to be the same as the ON time. • Press the SET button and hold for 3 seconds to activate time function. Move through programming functions by repeatedly pressing SET button until PG1 and P1-ON appear. The clock and program speed icons will appear (Fig. 4a). • Adjust the time using the hours and minutes button (up for hours, down for minutes). This is the time that the machine will turn ON. • Adjust the desired speed setting using the SPEED button. Fig. 4a Fig. 4b • Press the SET button until PG1 and P1-OFF appear. The speed icon will disappear (Fig. 4b). • Adjust the time using the hours and minutes button. This is the time that the machine will turn OFF. • Repeatedly press SET button until ( 6) disappears. • Press the PROGRAM button until PG1 appears. Unit will automatically operate per your settings. To run TWO customized ON/OFF cycles in a 24 hour period (PG2): NOTE: You are unable to set the OFF time to be the same as the ON time. The P2-ON time must be set for after the P1-OFF time. 6