Honeywell 3800G04-USBKITE User Manual - Page 59
Hands Free Time-Out, If you change the time-out duration for the secondary interface,
View all Honeywell 3800G04-USBKITE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Hands Free Time-Out The Automatic Trigger and Presentation Modes are referred to as "hands free" modes. If the imager's trigger is pulled when using a hands free mode, the imager changes to manual trigger mode. You can set the time the imager should remain in manual trigger mode by setting the Hands Free Time-Out. Once the time-out value is reached, (if there have been no further trigger pulls) the imager reverts to the original hands free mode. Note: If you change the time-out duration for the secondary interface, the duration of the primary interface will also be changed. Scan the Hands Free Time-Out bar code, then scan the time-out duration (from 0-300,000 milliseconds) from the inside back cover, and Save. Default = 5,000 ms. Hands Free Time-Out 3800g User's Guide 6 - 3