Honeywell 5890PI Installation Instructions - Page 4

àN5987-1Yä - manual

Page 4 highlights

LIMITATIONS OF THE PIR MOTION DETECTOR While the Intrusion Detector is a highly reliable intrusion detection device, it does not offer guaranteed protection against burglary. Any Intrusion Detection device is subject to compromise or failure to warn for a variety of reasons: • Passive Infrared Motion Detectors can detect intrusion only within the designed ranges as diagrammed in this installation manual. • Passive Infrared Motion Detectors do not provide volumetric area protection. They do create multiple beams of protection, and intrusion can be detected only in unobstructed areas covered by those beams. • Passive Infrared Detectors cannot detect motion or intrusion that takes place behind walls, ceilings, floors, closed doors, glass partitions, glass doors, or windows. • Mechanical tampering, masking, painting or spraying of any material on the lenses, windows or any part of the optical system can reduce the detection ability of the Passive Infrared Motion Detector. • Passive Infrared Detectors sense changes in temperature; however, as the ambient temperature of the protected area approaches the temperature range of 90° to 105°F (32° to 40°C), the detection performance can decrease. • This Passive Infrared Detector will not operate without the appropriate battery installed, or if the battery is weak or improperly connected (i.e., reversed polarity). • Passive Infrared Detectors, like other electrical devices, are subject to component failure. Even though this equipment is designed to last as long as 10 years, the electronic components in it could fail at any time. We have cited some of the most common reasons that a Passive Infrared Motion Detector can fail to catch intrusion. However, this does not imply that these are the only reasons, and therefore it is recommended that weekly testing of this type of unit, in conjunction with weekly testing of the entire alarm system, be performed to ensure that the detectors are working properly. Installing an alarm system may make the owner eligible for a lower insurance rate, but an alarm system is not a substitute for insurance. Homeowners, property owners and renters should continue to act prudently in protecting themselves and continue to insure their lives and property. We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved ones to learn about these developments. ADEMCO LIMITED WARRANTY Alarm Device Manufacturing Company, a Division of Pittway Corporation, and its divisions, subsidiaries and affiliates ("Seller"), 165 Eileen Way, Syosset, New York 11791, warrants its products to be in conformance with its own plans and specifications and to be free from defects in materials and workmanship under normal use and service for 24 months from the date stamp control on the product or, for products not having an Ademco date stamp, for 12 months from date of original purchase unless the installation instructions or catalog sets forth a shorter period, in which case the shorter period shall apply. Seller's obligation shall be limited to repairing or replacing, at its op tion, free of charge for materials or labor, any product which is proved not in compliance with Seller's specifications or proves defective in materials or workmanship under normal use and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered or improperly repaired or serviced by anyone other than Ademco factory service. For warranty service, return product transportation prepaid, to your nearest authorized Ademco distributor. THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT. Seller does not represent that the products it sells may not be compromised or circumvented; that the products will prevent any personal injury or property loss by burglary, robbery, fire or oth erwise; or that the products will in all cases provide adequate warning or protection. Customer un derstands that a properly installed and maintained alarm may only reduce the risk of a burglary, robbery, fire or other events occurring without providing an alarm, but it is not insurance or a guarantee that such will not occur or that there will be no personal injury or property loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD LIABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLER'S MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT, WHICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorized. ALARM DEVICE MANUFACTURING CO. A DIVISION OF PITTWAY CORPORATION 165 Eileen Way, Syosset, New York 11791 Copyright © 1998 PITTWAY CORPORATION àN5987-1Yä N5987-1 3/98

  • 1
  • 2
  • 3
  • 4

LIMITATIONS OF THE PIR MOTION
DETECTOR
While the Intrusion Detector is a highly reliable intrusion
detection device, it does not offer guaranteed protection against
burglary. Any Intrusion Detection device is subject to
compromise or failure to warn for a variety of reasons:
Passive Infrared Motion Detectors can detect intrusion only
within the designed ranges as diagrammed in this installation
manual.
Passive Infrared Motion Detectors do not provide volumetric
area protection. They do create multiple beams of protection,
and intrusion can be detected only in unobstructed areas
covered by those beams.
Passive Infrared Detectors cannot detect motion or intrusion
that takes place behind walls, ceilings, floors, closed doors,
glass partitions, glass doors, or windows.
Mechanical tampering, masking, painting or spraying of any
material on the lenses, windows or any part of the optical
system can reduce the detection ability of the Passive
Infrared Motion Detector.
Passive Infrared Detectors sense changes in temperature;
however, as the ambient temperature of the protected area
approaches the temperature range of 90
°
to 105
°
F (32
°
to
40
°
C), the detection performance can decrease.
This Passive Infrared Detector will not operate without the
appropriate battery installed, or if the battery is weak or
improperly connected (i.e., reversed polarity).
Passive Infrared Detectors, like other electrical devices, are
subject to component failure. Even though this equipment is
designed to last as long as 10 years, the electronic
components in it could fail at any time.
We have cited some of the most common reasons that a
Passive Infrared Motion Detector can fail to catch intrusion.
However, this does not imply that these are the only reasons,
and therefore it is recommended that weekly testing of this type
of unit, in conjunction with weekly testing of the entire alarm
system, be performed to ensure that the detectors are working
properly.
Installing an alarm system may make the owner eligible for a
lower insurance rate, but an alarm system is not a substitute for
insurance. Homeowners, property owners and renters should
continue to act prudently in protecting themselves and continue
to insure their lives and property.
We continue to develop new and improved protection devices.
Users of alarm systems owe it to themselves and their loved
ones to learn about these developments.
ADEMCO LIMITED WARRANTY
Alarm Device Manufacturing Company, a Division of Pittway
Corporation, and its divisions, subsidiaries and affiliates
("Seller"), 165 Eileen Way, Syosset, New York 11791, warrants
its products to be in conformance with its own plans and
specifications and to be free from defects in materials and
workmanship under normal use and service for 24 months from
the date stamp control on the product or, for products not
having an Ademco date stamp, for 12 months from date of
original purchase unless the installation instructions or catalog
sets forth a shorter period, in which case the shorter period
shall apply. Seller's obligation shall be limited to repairing or
replacing, at its option, free of charge for materials or labor,
any product which is proved not in compliance with Seller's
specifications or proves defective in materials or workmanship
under normal use and service. Seller shall have no obligation
under this Limited Warranty or otherwise if the product is
altered or improperly repaired or serviced by anyone other than
Ademco factory service. For warranty service, return product
transportation prepaid, to your nearest authorized Ademco
distributor.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE
DESCRIPTION ON THE FACE HEREOF. IN NO CASE
SHALL SELLER BE LIABLE TO ANYONE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY
WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS
CAUSED BY THE SELLER'S OWN NEGLIGENCE OR
FAULT.
Seller does not represent that the products it sells may not be
compromised or circumvented; that the products will prevent
any personal injury or property loss by burglary, robbery, fire or
otherwise; or that the products will in all cases provide
adequate warning or protection. Customer un derstands that a
properly installed and maintained alarm may only reduce the
risk of a burglary, robbery, fire or other events occurring
without providing an alarm, but it is not insurance or a
guarantee that such will not occur or that there will be no
personal injury or property loss as a result. CONSEQUENTLY,
SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL
INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED
ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING.
HOWEVER, IF SELLER IS HELD LIABLE, WHETHER
DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE
ARISING UNDER THIS LIMITED WARRANTY OR
OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN,
SELLER'S MAXIMUM LIABILITY SHALL NOT IN ANY CASE
EXCEED THE PURCHASE PRICE OF THE PRODUCT,
WHICH SHALL BE THE COMPLETE AND EXCLUSIVE
REMEDY AGAINST SELLER. This warranty replaces any
previous warranties and is the only warranty made by Seller on
this product. No increase or alteration, written or verbal, of the
obligations of this Limited Warranty is authorized.
ALARM DEVICE MANUFACTURING CO.
A DIVISION OF PITTWAY CORPORATION
165 Eileen Way, Syosset, New York 11791
Copyright © 1998 PITTWAY CORPORATION
àN5987-1Yä
N5987-1
3/98