Honeywell 6151 Installation Guide - Page 4

SPECIFICATIONS Dimensions: 4-7/8"H x 6-1/4"W x 1"D Wiring Terminals: GM - + LY ZN1 Description Data In to Control Panel - Ground (12 VDC -) + 12 VDC Power Input Data Out from Control Panel + Wired Zone 1 - Wired Zone 1 LEGEND = - Note: The keypad will display "OC" and beep periodically when there is a fault that prevents data from reaching the keypad. Display: Fixed word LCD, backlit. Sounder: Piezo (fire alarm sound is loud, temporal pattern pulsed tone; burglary alarm sound is loud, continuous, dual tone). Voltage: +12 VDC Current: Alarm rating: 80mA (LCD backlight on, sounder on) Standby rating: 50mA (LCD backlight on, sounder off); 35mA (LCD backlight off, sounder off) The control panel determines whether LCD backlighting is on or off. When determining the capacity of the control panel's backup battery, use the following chart: If Backlighting is . . . Then . . . On steadily Use the 50mA current rating Off when keypad is Use the 35mA current inactive rating. REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL PANEL WITH WHICH THIS DEVICE IS USED FOR WARRANTY INFORMATION AND FOR LIMITATIONS OF THE ENTIRE ALARM SYSTEM. 165 Eileen Way, Syosset, New York 11791 Copyright © 2006 Honeywell International Inc. www.honeywell.com/security ‡K6206V1EŠ K6206V1 6/06 Rev. B WWW.DIYWALWARMWFO.RUDM.ICOYM ALARMFORUM.COM