Honeywell C7189U Owner's Manual - Page 1
Honeywell C7189U Manual
View all Honeywell C7189U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
C7189U Remote Indoor Sensor (USE WITH VISIONPRO® THERMOSTATS) APPLICATION INSTALLATION INSTRUCTIONS This indoor sensor is designed to sense temperature at a remote location and send this information to the VisionPRO Thermostat. This sensor can be used as a stand alone sensor or as part of an averaging network. Once a remote indoor temperature sensor is connected to the thermostat, the thermostat's sensor is no longer used. The thermostat's installer setup should be modified to tell the thermostat that remote indoor temperature sensor(s) have been used. The Inside temperature reading on the thermostat's display will be the remote sensor(s) temperature location(s). SPECIFICATIONS M24055 Fig. 1. C7189U Remote Indoor Sensor Operating Ambient Temperature Range: 45 to 88°F (7.2 to 32°C). Display Range: 0 to 99°F (-18 to 37°C). Sensor Accuracy: +/-1.5°F at 70°F (+/-.84 at 21°C) Operating Relative Humidity: 5% to 95% non-condensing. Finish: White. Resistance Characteristics: Negative temperature coefficient (NTC). Resistance decreases as the temperature increases. Dimensions in inches (mm): 1 1/2 (38) wide x 2 1/4 (57) high x 3/4 (19) deep. Distance: Maximum distance between thermostat and sensor is 200 feet. Must be installed by a trained, experienced technician • Read these instructions carefully. Failure to follow these instructions can damage the product or cause a hazardous condition. • Check the specification in this booklet to verify that this product is suitable for the application. • Always test for proper operation after installation 69-1710EFS-1