Honeywell HCD544 User Manual - Page 11
Programming, OSD Menu Controls
View all Honeywell HCD544 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Programming Use the OSD (On-Screen Display) to program your HCD544 camera. OSD Menu Controls Figure 5 OSD Menu Controls Navigating through the menus ENTER (middle control) Press and hold two seconds to access the main SETUP menu. Press to enter a screen or select a menu option. !, " Move horizontally to and between menus and options. Increase/decrease the value. The menu/option blinks when selected. #, $ Move vertically to and between menus and options. The menu/ option blinks when selected. ".." indicates submenus. Select the menu, then press ENTER. Select RETURN, then press ENTER to return to the previous menu. Select SAVE AND EXIT, then press ENTER, to save your changes. Settings remain in effect when power is turned off, then on again. When no buttons are pressed, the menu display turns off automatically after five minutes. Your changes will not be saved. Document 800-01954 Rev A 11 08/08