Honeywell HCD544 User Manual - Page 16
Adding a Camera ID Display, CAMERA ID, ENTER, DOWN, LEFT, or RIGHT
View all Honeywell HCD544 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Menu Item 6 FACTORY DEFAULT 7 SW VERSION 8 RETURN Description YES = Restores all factory default settings. NO = Does not reset to factory default settings. Displays the current firmware version Exits the SPECIAL menu; returns to the SETUP menu Adding a Camera ID Display You may assign a Camera ID to be displayed on the monitor. To add an ID: 1. On the SPECIAL menu, select CAMERA ID and then press ENTER. Figure 8 Adding Camera Identification 1 POSITION R.BOT a ABCDEFGHIJKLMNOPQRST b UVWXYZabcdefghijklmn c opqrstuvwxyz12345678 d 9 2 ID: RETURN 2. Press the menu control UP, DOWN, LEFT, or RIGHT to select a character or number-selected character is blinking- then press ENTER to accept it. The character is saved and the cursor moves to the next position. 3. Repeat step 2 until your ID is complete. 4. Select POS to position where you would like the ID to be located on screen. Select the position using the menu control, then press ENTER to confirm the position. 16