Honeywell HCD544 User Manual - Page 8
Connecting the Camera, Video Connections
View all Honeywell HCD544 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting the Camera Note Check the power source from the external power supply before applying power to the camera. 1. Connect the VIDEO connector on the rear of the camera to the video-in connector on your monitor. 2. Connect the camera to a 12 VDC or 24 VAC power supply (appropriate to your installation). Use a screwdriver to first loosen the ~AC24V/DC12V terminal screws on the terminal block. Figure 3 Video Connections Power LED AC24V/DC12V terminal block Note To ease installation, the terminal block can be removed. The power connections of the removable terminal block are not polarity-sensitive. Connect either power lead to either connector terminal. 3. Secure the power leads by retightening the terminal screws until snug. 4. Plug the power supply into an appropriate power source. The power LED illuminates to show that the camera is receiving power. If it does not illuminate, check the removable terminal block connections and the power source. 8