Honeywell HE220 Owner's Manual - Page 1

Honeywell HE220 Manual

Page 1 highlights

HE220, HE260 Humidifier and Installation Kit WELCOME INSTALLATION INSTRUCTIONS/OWNER'S GUIDE Required Accessories (Included) To the comfortable world of humidified air. When you use your Honeywell humidifier, notice that your skin is not as dry, and that your scratchy throat and irritated nasal passages that aggravate allergies and asthma are steadily improving. You have also taken the first step in reducing the zapping you create when you walk on your carpet and then touch your TV, computer, metal door knob or your pet. Your furniture and woodwork are also benefitting from the difference that humidified air makes. Congratulations! You have just made a great investment in improving the comfort of your home. APPLICATION This kit contains your new Honeywell HE220 or HE260 Humidifier, H8908 Humidistat and all the accessories required for installation. INSTALLATION Preparing for the Installation Be sure to identify all the required (Table 1) accessories (included) and make sure the appropriate tools are available before beginning the installation. Table 1. Required Accessories. Quantity 3 ft (0.93m) 20 ft (6.2m) 20 ft (6.2m) 10 ft (3.1m) 1 bag 1 1 1 bag 1 Accessory Bypass ducting including: 6 in. (155 mm) diameter flexible duct Starter collar (flanged) Plain collar Summer shut-off damper Connecting straps (2) 18 gauge, two-strand thermostat wire 1/4 in. (6.35 mm) OD feed water tubing 1/2 in (12.7 mm) ID drain tubing Connecting and mounting hardware: Wire nuts (4) No. 8 sheet metal screws (18) Drain tube clamp Feed tube mounting clamps (6) Brass inserts (2) Plastic compression rings (2) Sail switch H8908 Humidistat Saddle Valve Assembly: Saddle valve and top clamp (1) Threaded bottom clamp (1) Bolts (2) Rubber gasket (1) Brass insert (1) Plastic bushing (1) Plug-in transformer Required Tools Tools required for installation include: • Tin snip. • Screwdriver. • Adjustable or open-end wrench. • Drill, punch or awl. • Level. ® U.S. Registered Trademark Copyright © 2002 Honeywell • •All Rights Reserved 69-1645EF

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

® U.S. Registered Trademark
Copyright © 2002 Honeywell •
•All Rights Reserved
INSTALLATION INSTRUCTIONS/OWNER’S GUIDE
69-1645EF
HE220, HE260 Humidifier and
Installation Kit
WELCOME
To the comfortable world of humidified air. When you use
your Honeywell humidifier, notice that your skin is not as
dry, and that your scratchy throat and irritated nasal
passages that aggravate allergies and asthma are
steadily improving.
You have also taken the first step in reducing the
zapping
you create when you walk on your carpet and then touch
your TV, computer, metal door knob or your pet. Your
furniture and woodwork are also benefitting from the
difference that humidified air makes.
Congratulations! You have just made a great investment
in improving the comfort of your home.
APPLICATION
This kit contains your new Honeywell HE220 or HE260
Humidifier, H8908 Humidistat and all the accessories
required for installation.
INSTALLATION
Preparing for the Installation
Be sure to identify all the required (Table 1) accessories
(included) and make sure the appropriate tools are
available before beginning the installation.
Required Accessories (Included)
Required Tools
Tools required for installation include:
Tin snip.
Screwdriver.
Adjustable or open-end wrench.
Drill, punch or awl.
Level.
Table 1. Required Accessories.
Quantity
Accessory
3 ft (0.93m)
Bypass ducting including:
6 in. (155 mm) diameter flexible duct
Starter collar (flanged)
Plain collar
Summer shut-off damper
Connecting straps (2)
20 ft (6.2m)
18 gauge, two-strand thermostat wire
20 ft (6.2m)
1/4 in. (6.35 mm) OD feed water tubing
10 ft (3.1m)
1/2 in (12.7 mm) ID drain tubing
1 bag
Connecting and mounting hardware:
Wire nuts (4)
No. 8 sheet metal screws (18)
Drain tube clamp
Feed tube mounting clamps (6)
Brass inserts (2)
Plastic compression rings (2)
1
Sail switch
1
H8908 Humidistat
1 bag
Saddle Valve Assembly:
Saddle valve and top clamp (1)
Threaded bottom clamp (1)
Bolts (2)
Rubber gasket (1)
Brass insert (1)
Plastic bushing (1)
1
Plug-in transformer