Honeywell HRSD16C500 User Guide - Page 54
DNS Server, Port Numbers Setup Screen
View all Honeywell HRSD16C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Configuration 3. Change the numbers by highlighting them and using the UP and DOWN arrows to increase or decrease the number. The factory default LAN settings are: IP Address:192.168.1.129 Gateway:192.168.1.254 Subnet Mask:255.255.255.0 4. Highlight the field beside DNS Server. Press the UP and DOWN arrows to set the IP address of the DNS server. 5. Highlight the Port Number Setup... field and press screen appears. . The Port Number Setup Figure 3-25 Port Numbers Setup Screen 6. Change the numbers by highlighting them and pressing to select the number field. Use the UP and DOWN arrows to increase or decrease the number value. The factory default Port settings are: Remote Admin: 8200 Remote Callback:8201 Remote Watch: 8016 Remote Search:10019 Note You need to get the appropriate Port Numbers for each RASplus and webGuard related program (Admin, Callback, Watch, and Search) from your network administrator. The system restarts automatically after changing the port settings. Do NOT use the same port number for two different programs. If you do, the DVR cannot be connected with the PC running RASplus or WebGuard. Caution When changing the port settings, you must change the port settings on the PC running RASplus or WebGuard. Refer to the RASplus manual for details. 54