Honeywell HRSD16C500 User Guide - Page 58
Table 3-6, DVRNS Setup Screen Options, Option, Action, Use DVR Name Service, DVRNS Server, Use NAT
View all Honeywell HRSD16C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Configuration Note When LAN settings have been changed, set up the DVRNS after saving your LAN changes by highlighting Save and pressing . Table 3-6 DVRNS Setup Screen Options Option Action Use DVR Name Service Highlight Use DVR Name Service and press to toggle between On and Off. Note The DVRNS (DVR Name Service) allows the DVR to use Dynamic IP addresses for remote connection. When this feature is On, you can access your DVR remotely using the DVR name instead of its IP address. For the DVRNS feature, the DVR should be registered on the DVRNS server. DVRNS Server Highlight the field beside DVRNS Server and press . A virtual keyboard appears with which you can enter the IP address or domain name of the DVRNS server. Note You need to get the IP Address or domain name of the DVRNS Server from your network administrator. Note You can use the domain name instead of IP address if you already set up the DNS Server when setting up the LAN. Port Highlight the field beside Port and press . Set the port number of the DVRNS server using the Up and Down arrows to increase or decrease the numbers. Use NAT Highlight Use NAT and press between On and Off. to toggle Note When using the NAT (Network Address Translation) device, refer to the NAT manufacturer's instructions for the proper network settings. DVR Name Highlight the field beside DVR Name and press . A virtual keyboard appears allowing you to enter the DVR name to be registered on the DVRNS server. Check Highlight the Check field and press or disable the name you entered. to enable 58