Honeywell HRSD16C500 User Guide - Page 79
Event Settings, Alarm-In Screen
View all Honeywell HRSD16C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Configuration Event Settings Your DVR can be set to detect many different events. You can also determine how it reacts to these events. The Settings tab for each of the events settings screen is different. But for each type of event setting, the Actions 1 and Actions 2 tab settings are the same. On the Actions 1 tab, you can choose which camera or cameras you want recorded with that event. You can set what the DVR does when an alarm output is detected, which can include an internal DVR buzzer. You can also set notification actions. On the Actions 2 tab, you can select PTZ (pan, tilt, zoom) presets for each camera and you can assign spot monitors to cameras. Figure 3-51 Event Menu Alarm-In Screen The alarm terminal strip on the back of the DVR has inputs associated with each alarm. You can set up each input on the Alarm-In screen. Highlight Alarm-In in the Event menu and press screen appears. . The Alarm-In Settings Setup Figure 3-52 Alarm-In Settings Screen Document 800-03650 Rev D 79 02/09