Honeywell HRSD4F250 User Guide - Page 44
Network
View all Honeywell HRSD4F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Setup Network Network Configuration Configure network settings. NETWORK CONFIGUR ATION NETWORK DHCP IP ADDRESS SUBNET MASK GATEWAY DNS DDNS DDNS SERVER ID PASSWORD HOST NAME ROUTER IP STATUS HOST NAME dvr 000.000.000.000 000.000.000.000 000.000.000.000 000.000.000.000 HWddns.com user **** host OFF CHECK UNCHECKED SAVE CANCEL DHCP Select - System gets IP address from DHCP server. Clear - User must manually define a static IP address. Contact the network administrator for this information. HOST NAME - The DVR name. IP ADDRESS - DHCP or Static. Contact your network administrator for this information. DDNS SERVER - The current DDNS server. Note See the DDNS information sheet included with the DVR for your ID and password assigned to your free hwddns.com account. ID - Username for the DDNS server account. PASSWORD - Password for the DDNS server account. HOST NAME - Hostname for the DDNS server account. ROUTER IP - When set to the ON state, Router IP reports your network's external IP address to the DDNS service. This is important if your router is running NAT (Network Address Translation) services for your network. If you are unsure of your network configuration, Honeywell recommends this feature be set to ON. STATUS - Select CHECK to confirm the DDNS settings. If Check returns SUCCESS, the settings are correct and DDNS is configured. If Check returns FAIL, check to make sure the ID, PASSWORD and HOSTNAME are correct, and then try again. 44