Honeywell HZ2206TGT User Guide - Page 6
Safety Features, Cleaning And Storage, Troubleshooting, Electrical Rating
UPC - 092926343354
View all Honeywell HZ2206TGT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
HZ-2200-3200-3220_OM_Rev1.qx 6/8/05 1:19 PM Page 6 SAFETY FEATURES These heaters are equipped with several devices and features for added protection: • SafeGuard™ Alert Heat Indicator Badge visually indicates the grille is hot by turning from black to red (HZ-3220 Series only). When the grille begins to cool after the heater is shut off the badge will turn black again. • Child Resistant push-to-turn power control knob (HZ-2200 Series and HZ-3200 Series) or a child-lock feature (HZ-3220 Series). • A tip-over switch that disables the heater if it is accidentally tipped forward or backward. • A high temperature safety control prevents overheating (HI limit). • This heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater should it operate at a higher than normal temperature. • This heater was created using a high quality safety plastic. CLEANING AND STORAGE CLEANING We recommend that the heater be cleaned at least once a month and before off-season storage. • Turn the heater OFF and unplug it. Allow it to cool. • Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES, POLISHES OR ANY CHEMICAL SOLUTION. STORAGE • Clean your heater using the above-mentioned steps, then store it in a cool, dry place. • This heater does not disassemble. TROUBLESHOOTING If your heater shuts off unexpectedly or fails to operate, one of your heater safety features may have been activated to prevent overheating. • Be sure it is plugged in and that the electrical outlet is working. • Check your Thermostat setting. The unit may simply be off because you have reached your desired heat setting. • Check for any obstructions. If you find an obstruction, turn the heater OFF and unplug it. Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug the heater in and follow the OPERATION instructions. ELECTRICAL RATING This product is rated 12.5 Amps (1500 watts) @ 120V, 60Hz.