Honeywell MK1650-62B14 User Guide - Page 25
Presentation Mode, Fixed-Mount or In-Stand Default, Single Trigger Mode, Out-of-Stand
View all Honeywell MK1650-62B14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
SCANNER OPERATION MODES OF OPERATION* Presentation Mode, Fixed-Mount or In-Stand (Default) 1. The IR detects an object in the IR activation range and the scanner's light output automatically starts to flash as it attempts to scan the bar code. 2. The scanner continuously attempts to scan the bar code until either it succeeds or the bar code is removed from the scanner's field of view. 3. When scanner successfully reads the bar code it will beep once, the white LED will flash and the decoded data will be transmitted to the host. Single Trigger Mode, Out-of-Stand * The IS1650 can switch into different modes of operation using the MetroSet2 Software or Area Imaging Supplemental Guide (00-02281). 1. The IR detects an object in the IR activation range and automatically turns on linear illumination. 2. Aim the scanner's line of light over the bar code. 3. Press the trigger to initiate scanning. The scanner's light output will start to flash as it attempts to scan the bar code. If the trigger is released the scanner will stop trying to scan. 4. When scanner successfully reads the bar code it will beep once, the white LED will flash and the decoded data will be transmitted to the host. Figure 15. Single Trigger Mode, Out-of-Stand * For additional configurable modes of operation, please refer to the Area Imaging Supplemental Configuration Guide (MLPN 00-02281). 21