Honeywell Q682 Owner's Manual - Page 12
Setting the Heating Program
View all Honeywell Q682 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
To change the pins or add a new energy savings period- • To insert a pin, push it straight into the selected notch on the program dial until it's completely seated. • To remove a pin, press against program dial and pull the pin straight out. Do not attempt to change a pin if it is engaged with the program index wheel. • On heating-cooling systems, you must remove the program pins from the heating program to set new times for your cooling program. Write down your colors and time for reprogramming at the next heating season. Also, you may want to change the temperature setting lever positions. Setting the Heating Program Decide when you want the temperature to reach the comfort level. Find the notch on the program dial that's one-half hour before this time and insert a red pin. The half-hour head start gives the furnace time to heat the house before you wake up or arrive home. WINTER SUMMER 1 PROGRAM PROGRAM TEMPERATURE PIN IN TEMPERATURE PIN IN °F °C CONTROL °F °C CONTROL NIGHT BEGINS 58 14 BLUE 80 27 RED ENERGY 10:00 PM SAVING ENDS 68 20 RED 75 24 BLUE PERIOD 6:00 AM DAY BEGINS 58 14 BLUE 80 27 RED ENERGY 7:30 AM SAVING ENDS PERIOD 4:00 PM 68 20 RED 75 24 BLUE 1 NOT APPLICABLE ON HEATING-ONLY MODEL. M8677 Fig. 5-Program examples. 12 69-0563-2