Honeywell RTH5100B Owner's Manual - Page 24

display, press the Up or Down button to select your - setup

Get Honeywell RTH5100B PDF manuals and user guides View all Honeywell RTH5100B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Configure Installer Setup (Cont) 6. If you do not have a number 2 on the left side of your display, go to the next page. 7. If you have a number 2 on the left side of your display, press the Up or Down button to select your setting for Installer Setup Number 2 in table below. 8. After you select your setting, press the Next button to go the next Installer Setup Number. INSTALLER SETUP NUMBER SETTING Replace Batt Service Needed Done Next UP BUTTON DOWN BUTTON NEXT BUTTON 2 69-1716 Heat Pump Changeover Valve Use this setting if you connected a wire labeled O to O/B W terminal. Use this setting if you connected a wire labeled B to O/B W terminal. M22060 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
69-1716
24
Configure Installer Setup (Cont)
6.
If you do not have a number
2
on the left side of
your display, go to the next page.
7.
If you have a number
2
on the left side of your
display, press the Up or Down button to select your
setting for Installer Setup Number 2 in table below.
8.
After you select your setting, press the Next button
to go the next Installer Setup Number.
Replace Batt
Service Needed
Done
Next
M22060
SETTING
INSTALLER SETUP
NUMBER
2
Heat
Pump
Change-
over
Valve
Use this setting if you connected a
wire labeled O to O/B W terminal.
Use this setting if you connected a
wire labeled B to O/B W terminal.
DOWN BUTTON
NEXT BUTTON
UP BUTTON