Honeywell T4700 Owner's Manual - Page 6

Thermostat Reset The T4700 can be reset to its default settings (Table 1) by inserting a bent paper clip or similar wire into the small hole on the front of the thermostat (next to to the (+) key with the cover open). This resets only the clock; the programmed schedule is retained. Homeowner Programming IMPORTANT After programming is complete, the device reverts to normal Run mode within five minutes, if no key was pressed, and any new setting is stored in its memory. The thermostat is flexible and can be programmed to meet your lifestyle. Four time periods are available: WAKE is the time the thermostat turns on the equipment after an energy saving period. When deciding what time to set for your WAKE period, include extra lead time, depending on the outside temperature and your equipment response time, to give the equipment time to adjust the temperature before you get up. LEAVE is the time you can set for an energy-saving temperature while you are away at work or school. RETURN is the time the thermostat turns on the equipment after an energy saving period. When deciding what time to set for your RETURN period, include extra lead time, depending on the outside temperature and your equipment response time to give the equipment time to adjust the temperature before you arrive home. SLEEP is the time you can set for an energy-saving temperature while you are sleeping. IMPORTANT Always press the keys with you fingertip or similar blunt tool. Sharp instruments like pens and pencil points can damage the keys. See Tables 2 - 6 to program your thermostat. 69-1396-2 6