Honeywell T8112C Owner's Manual - Page 6
Set Current Time/Day, Heating Program, Set Clock/Day, Clock/Day, Run Program, Set Schedule - d thermostats
View all Honeywell T8112C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
NOTE: If you decide not to program the thermostat, it will automatically control heating at 68°F (20°C), and cooling at 78°F (26°C), 24 hours a day. This guide can be used for programming your new thermostat. IMPORTANT Batteries are required for operation and programming. When inserting batteries, set the System switch to Off. Remove the battery door (on the thermostat left side) using a coin at the bottom. See Maintaining Your Thermostat section. Set Current Time/Day To set time, press and release Set Clock/Day key once. Press Time keys until current time shows. To set the day, press and release the Set Clock/Day key again. Press Time keys until current day shows. Press Run Program key. Heating Program With the System switch set to Heat, press and release the Set Schedule key once. WAKE, Mon-Fri, and SET appear on the display. Use Time keys to program WAKE time and Temp keys to program WAKE temperature for Mon-Fri. Repeat sequence for LEAVE, RETURN, and SLEEP. 6 69-0862-4