Honeywell TE923W User Manual - Page 13
Assembly, Battery installation, Aligning, NORTH, Mounting, Placement tips - anemometer
![]() |
UPC - 843616001852
View all Honeywell TE923W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Assembly • Slide the wind cups on to the anemometer rotating shaft. Do not use force. • Insert the Allen Wrench (provided) into the wind cup set screw opening. Tighten the set screw to secure wind cups to the rotating shaft. • Test to ensure cups are securely fastened to the shaft. Battery installation • Remove four (4) screws from the battery compartment with a small Phillips screwdriver. • Open the battery compartment and install 2 "AA" size alkaline batteries (not included) matching the polarities shown. • Replace the battery compartment door and secure the screws. Aligning • Point the wind direction vane to the north (use a compass or map if necessary). • Press the button inside the "SET" opening located inside battery compartment with a paper clip or similar tool. The "SET" selects a new direction for NORTH and, when pressed repeatedly, alternates between the factory default NORTH and user selected NORTH. • Select the factory set mode. It will be also a default setting in the future. • Set current wind direction as NORTH. Note: Repeat this procedure every time when changing the batteries. Mounting Mount the anemometer onto a vertical surface, using the fittings provided. Placement tips: • The anemometer should be mounted in an open area with a free air flow; away from the nearby trees, buildings or other structures. • For optimal performance, mount the anemometer at 33 feet (10meters) above the ground in unobstructed area. 13 TE923W IM1(ENG) HONEYWELL R.pmd 13 4/11/08, 5:26 PM
![](/manual_guide/products/honeywell-te923w-user-manual-839e9b1/13.png)