Honeywell TE923W User Manual - Page 31
Viewing the Max/Min Channel Temperature and Humidity
UPC - 843616001852
View all Honeywell TE923W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Accessing Temperature and Humidity Mode Press main unit UP or DOWN until the IN icon on the upper right will flash. From the remote control: Press . Viewing Temperature and Humidity for each Channel Static Display: In Temperature and Humidity Mode, press the CHANNEL button to recall a different channel. Channel Auto-Scan Display: To enable automatic scan of the different channels, press and hold CHANNEL, until the icon is displayed. Each valid channel will be alternately displayed with a 5 seconds delay. Recalling of Temperature and Dew Point Displays In Temperature and Humidity Mode, press the SET button to recall temperature and relative humidity or dew point and relative humidity. Set the Temperature in Celsius or Fahrenheit. In Temperature and Humidity Mode, press and hold the SET button to toggle the temperature in Celsius (ºC) or Fahrenheit (ºF). Activating/Deactivating the Temperature Alerts In Temperature and Humidity Mode, press the ALARM/CHART button to recall a current temperature for the corresponding channel, the upper temperature alert with icon (if disabled, displays OFF), or lower temperature alert with icon (if disabled, displays OFF). Once the above alerts are displayed, press UP or DOWN to enable or disable the corresponding alert. Programming the Temperature Alerts • In the Temperature and Humidity Mode, press the ALARM/CHART button selecting the desired alarm. • Press and hold the ALARM/CHART button until the remote temperature and or icon starts flashing. • Adjust the temperature digits for the Temperature Alert using the UP or DOWN. Press and hold either button for fast digits advance. • Press the ALARM/CHART button to confirm selection and return to the temperature alert selection screen. Disabling Temperature Alarm(s) In the Temperature & Humidity Mode, press the ALARM/CHART button to disable the alarm(s). Viewing the Max/Min Channel Temperature and Humidity In the Temperature & Humidity Mode, press the MEMORY button to recall a current temperature and humidity, minimum temperature and humidity or maximum temperature and humidity at the remote location. Resetting the Remote Temperature and Humidity Memory In the Temperature and Humidity Mode, press and hold the MEMORY button to clear memory for all channels. 31 TE923W IM1(ENG) HONEYWELL R.pmd 31 4/11/08, 5:28 PM