Honeywell W8735B Owner's Manual - Page 19
Filter Alert Setting Enable/Disable, Press 1 to change. You will hear, Your Alert Dial
View all Honeywell W8735B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ZONING If the Zone ID Number is not entered correctly, you will hear, "Invalid ID." Follow the menu and these instructions and enter a new Zone ID Number. You will hear, "Zone one is the Great Room (if you entered Zone ID Number 8, for example); to hear another zone, press 1." 3. If your setting is correct, press 1 to hear the next zone. 4. Repeat the steps 1-3 to enter a zone name for each zone. Filter Alert Setting (Enable/Disable) The Telephone Access Module activates a dial-out alert if it receives a message from the thermostat (if your thermostat has this capability) indicating the furnace filter needs changing or your electronic air cleaner cells need cleaning. It is possible to enable or disable the Telephone Access Module Filter Change Dial-out feature. The factory default setting is enabled to activate an alert if your filter change message is received from the thermostat. After you entered Configuration Number 7, and it is set to the factory setting, you will hear: "The filter alert is enabled." If your Filter Alert setting is correct, press the * key to return to the Configuration Menu. You will hear, "To change, press 1." 1. Press 1 to change. You will hear, "Your Filter Alert Setting is disabled." This means the Telephone Access Module will not activate an alert if your filter change message is received from the thermostat. 2. If this is the Setting you want programmed, press the * key to return to the Configuration Menu. If the value entered is not a 1 or the * key, you hear, "Invalid Setting." Follow the menu and these instructions to change the filter alert setting or press the * key to exit. Dial-out Alert Setting (Enable/Disable) The option to have the Telephone Access Module dialout on an alert condition can be disabled. The factory default setting is enabled to dial out when an alert condition is observed. After you enter Configuration Number 8, and it is set to the factory setting, you will hear, "The Alert Dial-out is enabled." If your Alert Dial-out setting is correct, press the * key to return to the Configuration Menu. You will hear, "To change, press 1." 1. Press 1 to change. You will hear, "Your Alert Dialout is disabled." This means the Telephone Access Module will not dial-out on an alert condition. 2. If this is the setting you want programmed, press the * key to return to the Configuration Menu. If the value entered is not a 1 or the * key, you will hear, "invalid Setting." Follow the menu and these instructions to change the Alert Dial-out setting or the * key to exit. 19 69-1353