Hoover BH50010 Manual - Page 4
How To Operate - vacuum
UPC - 073502029725
View all Hoover BH50010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2. HOW TO OPERATE Assembly 2.1 2.2 2.3 Nozzle Release Button Line up nozzle with main body and firmly push nozzle into body of unit until nozzle locks into place. NOTE: To remove, push release button and pull the nozzle away from the body of the unit. 2.4 Insert handle into body. NOTE: Ensure handle faces proper direction. 2.5 Insert screw and tighten until secure. NOTE: DO NOT over tighten screw. 2.6 Charge battery fully before first use. Fully discharged battery will take up to 3 hours to charge. NOTE: See battery and charging manual for battery charging instructions. Use only manufacturer's supplied or recommended battery and charger. 2.7 Insert charged battery into battery cavity until latch is locked into place. NOTE: When inserting and removing battery, ensure the switch is in the off position marked "O". 2.8 Hold down nozzle with foot and tilt back to reclining position. To turn vacuum on, roll button forward. PUSH DIAL: O - OFF I - Suction ON - Recommended for use on hard floors. II - Suction and Brushroll ON - Recommended for use on carpet. To remove and charge battery, turn switch to off position. Pull on release lever located on end of battery and pull out gently.