Hoover BH50010 Manual - Page 5
Maintenance - parts
UPC - 073502029725
View all Hoover BH50010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3. MAINTENANCE Dirt Cup & Filter Removal & Replacement IMPORTANT: For best results, clean after each use. REGULAR MAINTENANCE: Each time the dirt cup is emptied, the filter should be cleaned (Filter will be discolored after use. This will not affect the filter's performance.) Dirt Cup Removal and Cleaning 3.1 3.2 3.3 To Remove dirt cup, depress the dirt cup release button located on the top of the dirt cup and tip away from the body of the unit. Press dirt cup empty button over trash can to release debris. Push door closed until latch clicks. Dirt Cup Debris and Clog Removal 3.4 In order to maintain optimum performance of your cleaner, each time the dirt cup is removed for emptying it is recommended to check if there is any debris trapped in the dirt tube (A). If so, remove the debris before re-attaching the dirt cup to the cleaner. A If you still are experiencing reduced suction/performance, detach the nozzle base from the main unit (press button on back of nozzle to release, B) and inspect both openings of the nozzle base (C) for any trapped debris. Remove any debris that may be present before re-attaching the nozzle base to the main body of the cleaner. 3.5 B C Filter Removal and Cleaning 3.6 3.7 Pull out filter cap. Pull out filter and brush clean. Rinse under cold water as needed. WARNING: Always dry filter for 24 hours before replacing. WARNING: Do not use detergent or hot water to clean filter. For filter replacement, please call 1-800-944-9200 or visit our website at www.hoover.com to locate a dealer nearest you. Filter Service Part # 410044001.