Hoover C1660 Manual - Page 4

2-2 2-3 2-4 C B A Hose connection Hose must be attached to cleaner base for floor cleaning. To attach hose, use the end of the hose to push the cover (A) down and push hose onto opening. Twist hose end slightly to tighten the connector. ON-OFF-HUSH™ switch Plug cord into electrical outlet. To turn cleaner ON, push switch (B) up. To turn cleaner OFF, push switch to middle position. For quieter vacuuming, push switch down (HUSH) position. Put Power Boost Switch in neutral when using ON or HUSH setting. Power Boost Switch Use the Power Boost Switch (C) to add extra cleaning power for cleaning heavily soiled areas and for picking up dry debris spills. Push the switch forward for a temporary boost. When released, the boost will automatically go to the "neutral" position. Push the switch back to lock it in the Boost position. To unlock, push the switch forward to the "neutral" position. Use the lock position for larger areas or when using the cleaning tools. The Boost can be used with either the ON or HUSH mode selected (see Fig. 2-3). Put Power Boost Switch in neutral when using ON or HUSH setting. 2-5 2-6 2-7 Handle positions The handle of your cleaner has three positions; upright when using cleaning tools; operating position for general operation on carpet and floors; low for reaching under low furniture. Step on handle release pedal to lower handle. Transporting cleaner Put handle in upright position. Tilt cleaner back on rear wheels. Push forward. Carrying handle Use the carrying handle to lift the cleaner. 4