Hoover F7412 Manual - Page 17

Manual del Propietario Instrucciones de Funcionamiento y Servicio www.hoover.com Aspiradora para alfombras Dual V™ To clean nozzle If lint or other debris becomes lodged in nozzle, it can be removed for cleaning. 3.9 Unplug cleaner from electrical outlet. Remove both tanks as described in Figs. 2.9- 2.10. With handle in upright position, tilt cleaner back so that handle rests on the floor. Lift up rear edge of nozzle. Slide nozzle up and remove from cleaner. 3.10 B A To replace nozzle, line up tabs (A) on nozzle with holes (B) in cleaner. Slide tabs into holes. Slide nozzle completely onto cleaner. Press down on nozzle to secure it. Replace recovery tank (Fig. 2-21). The nozzle must be in the proper position in order for the recovery tank to go on properly. Removable brushes Your cleaner is equipped with removable brushes. Follow these directions for changing brush assemblies or for easy cleaning. To remove brushes Disconnect cleaner from electrical outlet. To prevent possible leaking, remove clean water tank and recovery tank. Set tanks aside. 3.11 With handle in upright position, tilt cleaner back until handle rests on the floor. Grab brush assembly and pull firmly. The brushes can be cleaned under running water. To replace brushes Align posts (A) on both ends of brush assembly with slots (B) in cleaner housing. Make sure that the square post (C) also aligns with the square hole (D). Turn brushes slightly until post fits easily into hole. Press brush assembly firmly to snap into place. 3.12 B A C D B A Por favor, lea este manual antes de hacer funcionar su producto Hoover®. ©2008 Healthy Gain Investments, Ltd. Todos los derechos reservados. N°56518217. 6/08 17 www.hoover.com