Hoover FH50005 Manual - Page 9

CARPET CLEANING (continued) • IMPORTANT • • For best cleaning results use a steady, forward and backward motion. Cleaning should be done at half the speed of dry vacuuming. For heavily soiled areas, repeat if necessary. • While depressing solution spray trigger, slowly push unit forward. Release trigger and pull unit backward in the same path to remove dirty water and solution from carpet. (For heavily soiled areas, repeat if necessary). • IMPORTANT: IF THE SOUND OF THE MOTOR CHANGES TO A HIGH PITCH, THIS INDICATES THE DIRTY WATER TANK IS FULL AND MUST BE EMPTIED. EMPTYING DIRTY WATER TANK Your Carpet Cleaner is equipped with a shut off valve within your dirty water tank. When the dirty water tank becomes full, the blue float (viewed from top of tank) will rise, shutting off the air flow through the nozzle. WARNING To reduce the risk of injury from moving parts- unplug before servicing 2.10 Grasp top of dirty water tank handle and push latch to release. 2.10 2.11 Grasp handle and pull tank out of base. 2.12 Remove dirty water tank lid. 2.13 To empty dirty water tank, grasp handle with one hand and nozzle with the other and empty into sink. Replace dirty water tank lid. 2.12 2.14 Rinse dirty water tank and filter with hot tap water. Wipe and let dry thoroughly before storing to prevent mildew from forming. 2.14 2.11 2.13 • IMPORTANT • Do not use any chemicals when cleaning the tank. 9