Hoover FH50220 Manual - Page 5

1. Cleaner asseMbly Carton Contents A. Base, Hose and Removable Dirty 1.1 Water Tank A B. Upper Handle C. Handle Bolt (located in handle of unit) D. SpinScrub® 60 Brush Assembly or SpinScrub® 77 Brush Assembly (Assembled on unit) E. Stair/Upholstery Nozzle (Assembled on unit) F. SpinScrub® Hand Tool* G. Clean Water Tank/ Carry Handle H. Squeegee* (Assembled on unit) I. Solution Bottle b C Carpet Upholstery Cleaner bare floor E cleaner PreCleaner D I G F* Remove all parts from carton and identify each item shown. Make sure all parts are located before H* disposing of packing materials. *Available on select models only. Accessories not included with your model may be purchased separately by visiting hoover.com. NOTE: Phillips screwdriver needed for assembly. attaCh handle Handle ships with bolt screwed in place. Remove bolt. 1.2 Insert handle section into vacuum base. Push down firmly. 1.3 Insert bolt. Tighten with screwdriver. 1.2 1.3 upper tank 1.4 Position bottom of tank onto cleaner. 1.5 Push upper part of tank to lock it into place. 1.4 1.5 store hose 1.6 Wrap hose around back of cleaner. Store hose handle in holster. 1.6 Cord storaGe 1.7 Wrap cord around cord hooks for convenient storage. Attach the plug end to cord. 1.7 5 Actual model may vary from images shown.