Hoover Power Scrub Elite Pet Product Manual - Page 11
Before you begin Cleaning
View all Hoover Power Scrub Elite Pet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Before you begin Cleaning: Vacuum carpet and upholstery thoroughly with a Hoover vacuum before use. Don't use the carpet cleaner as a traditonal vacuum cleaner. Use your Hoover carpet cleaner only if upholstery fabric is marked with a "W" (for "wet" clean) or "S/W" (for "solvent/dry" or "wet" clean). Don't clean fabric marked "S" ("solvent/ dry" clean only). Test for colorfastness in a small, hidden area. Gently rub surface with a dampened white cloth. Wait ten minutes and check for color removal or bleed with a white paper towel. Move furniture out of area to be cleaned. Place aluminum foil or wax paper under legs of furniture too heavy to move to prevent wood finishes from staining carpet. Pin up furniture skirts and draperies. Pretreat spots and heavy traffic areas with a Hoover® Cleaning Solution*. See the "Cleaning Solutions" section. *Available at additional cost if not included with your model. Pretreating: For best results, pretreat stains with a Hoover spot treatment (see Hoover Cleaning Solution Guide, pg. 23) to help loosen and remove even the most stubborn stains. NOTE: To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water spray. NOTE: To avoid damage to wood floors underneath area rugs or carpet, place waterproof material (ex: plastic) underneath them before cleaning. 8