Hoover Power Scrub Elite Pet Product Manual - Page 25
Brushes: How To Change And Clean
View all Hoover Power Scrub Elite Pet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Maintenance: BRUSHES: HOW TO CHANGE AND CLEAN How to Remove 1. To prevent possible leaking, remove Clean Water Tank and Dirty Water Tank. 2. With handle in upright position, tilt cleaner back until handle rests on the floor. 3. Grab brush assembly and pull firmly (Fig. H). 4. The brushes can be cleaned under running water. How to Replace 1. Align black posts on both ends of brush assembly with the slots on the bottom of the cleaner. 2. Make sure that the hexagonal post (A) also aligns with the hexagonal hole (B). Turn brushes slightly until post fits easily into hole. 3. Press brush assembly firmly to snap into place. ! CAUTION ! To reduce the risk of injury from moving parts - Unplug before connecting SpinScrub® Hand Tool. Not to be used for grooming pets. B A Fig.H Storage Before storing: Empty Clean Water Tank and let air dry. Replace on cleaner. Empty Dirty Water Tank, rinse tank and lid thoroughly with clean water and let air dry. Allow brushes and underside of carpet cleaner to air dry thoroughly before storing carpet cleaner on a carpeted or wood surface. Lubrication The motor is equipped with bearings that contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Therefore, do not add lubricant to motor bearings. 22