Hoover SH40100 Product Manual - Page 11
Warning, Caution
View all Hoover SH40100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Clearing blockages ! WARNING ! To reduce the risk of personal injury - Unplug before cleaning or servicing. 4.9 Low suction or pick up may be due to a blockage in the system. Refer to the following steps to check for blockages, continuing with each step until the blockage is found: ! CAUTION ! Do not use sharp objects to clean out hose as they can cause damage. 4.11 4.9 The flexible hose can be disconnected from the vacuum cleaner by pressing the release button on hose connector and pull out as shown. Remove any blockages found then reconnect the hose securely. 4.10 Plug cleaner in, turn on, and check hose end for suction. Remove any obstructions. 4.11 Remove power nozzle from wand and attach wand to hose. Check for suction and remove any blockages. 4.12 Remove power nozzle from wand and turn over to bottom. Unlock nozzle cover latches. 4.13 Turn power nozzle over to top and open hinged nozzle cover to access brushroll. 4.14 Clean debris from brushroll. 4.13 4.10 4.12 4.14 Lubrication The motor and brushroll are equipped with bearings that contain sufficient lubrication for their lifetime. The addition of lubricant could cause damage. Therefore, do not add lubricant to motor or brushroll. 11 Actual model may vary from images shown.