Hoover U5018 Manual - Page 4

2. How to use Cleaner description 2-1 1 8 4 2 18 2 16 15 3 10 14 11 17 5 9 6 7 1. Handle 2. ON/OFF switch 3. Cord hooks: wrap cord around hooks for storage. Top hook can be rotated right or left for easy cord release. 4. Hose 5. Dusting brush 6. Furniture nozzle 7. Crevice tool 8. Carrying handle 9. Wands 10. Final filter 11. Handle release lever: step on lever to lower handle to operating or low positions 12. Furniture guard: helps prevent cleaner from marking furniture. 13. Nozzle control knob: slide knob to correct setting for height of carpet being cleaned 14. Headlight 15. Check bag indicator 16. Bag door 17. Cord clip 18. Hose holder Operate cleaner only at voltage specified on data plate on back of cleaner. This cleaner is intended for household use. 12 13 Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. 2-3 ON-OFF switch Plug cord into electrical outlet. To turn cleaner ON, push switch up. To turn cleaner OFF, push switch down. 2-4 2-2 A Cord clip To help keep the cord out of the way while vacuuming, position cord in cord clip (A) located on the handle. 2-5 Transporting cleaner To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward. Carrying cleaner The cleaner can also be moved by using the carrying handle. 4 Handle positions The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating position for general operation on carpet and floors; low for reaching under low furniture. Step on handle release lever to lower handle.