Hoover U5162 Manual - Page 8

27 28 29 E H 27 Although not necessary, the filter can be removed from the lid for cleaning. Pull filter off lid and tap bottom of filter. To replace, firmly press filter onto lid until it stops. 28 Replace lid and filter on filter chamber. Replace chamber on dirt cup. 30 31 E 30 Rotate dirt cup handle (E) up to lock cup in place. Correct Incorrect 31 Be certain that the dirt cup is locked in the correct position. 29 Place bottom of cup behind tab (H) and press cup into cleaner. Final filter 32 I Cleaning final filter 32 The final filter assists in returning clean air to the room. Remove dirt cup. Press latch (I) and remove filter grid. Headlight replacement What to buy This cleaner uses a 12 volt, wedge base type 912 bulb, HOOVER part No. 27313107. 33 34 35 J K 33 Lift out filter (J) and hand wash in cold water with a mild detergent. Let filter air dry then reposition. Replace filter grid and dirt cup. Should you want to replace this filter, ask for HOOVER part no. 38766008. Do not operate cleaner without any of the filters in place. 8 Disconnect cleaner from electrical outlet. 34 Remove dirt cup as described in Fig. 21. Insert a flat screwdriver into slot and remove the access door (K). 35 Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place. Excessive force is not required.