Hoover U5458910 Manual - Page 4
STEP II Attach hose
View all Hoover U5458910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
1-5 A 1-6 1-7 Remove bag door on cleaner body by pushing down at top of door and pulling door outward. Switch (A) above bag door should be in OFF position. While holding rack in place, slide handle onto cleaner body. Make sure tab is inserted fully into slot. Push bolts into holes on back of handle. 1-8 1-9 1-10 Place nuts in recessed areas on front of handle. Hold each nut in place while tightening each bolt securely with a Phillips screw driver. Reposition bag door by fitting tabs on bottom of door into opening. Press top of door to snap securely shut. Press cord into the 3 notches and the clip as shown. STEP II Attach hose 1-11 A NOTE: Hose must be connected as shown for all operations. 1-12 1-13 B Align end of hose with projections (A) over slots (B) in dirt duct. C B Slide hose into (B) and twist hose to lock it into place. Lift hose tube cover (C). D E Position hose over rack and into hose tube (D) or (E) (depening on your model). 4