Hotpoint RB790DPWW Owners Manual - Page 34
Self-Cleaning Models
View all Hotpoint RB790DPWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Before you call for service... Troubleshooting Tips odor emitting from the oven vent strongodor Possible Causes This is normal in a new oven and will disappear in time. An odor from the insulation around the inside of the oven is normal for the first few times the oven is used. What To Do • To speed the process, set o self-cleon cycle for o minimum of 3 hours. See the Using the self-cleaning oven section. • This is temporary. Self-Cleaning Models The oven temperature is too • Allow the range to cool to room temperature and reset high to set a self-clean operation, the controls. Oven controlsimproperly set. • See the Using the self-cleaning oven section. Oven door is not in the locked position, • Make sure you move the door latch handle oll the way to the right. Oven starts a self-clean cycle whenyou wanted to bake, roast or broil Oven door locked during cooking, • Turn the Oven Temperature knob to OFF.Allow the oven to cool. Never force the door latch handle. "Crackling" or ,popping'! sound This is the sound of the metal • This is normal. heating and cooling during both the cooking and cleaning functions. Excessive soil. • Press the CLEAR/OFFpad. Open the windows to rid the room of smoke. Wait until the light on the SELFCLEAN pod goes off. Wipe up the excess soil ond reset the clean cycle. not unlock Oven too hot. • Allow the oven to cool below locking temperature. Oven notclean aftera Oven controls not properly set. • See Using the self-cleaning oven section. _ii ii i when trying to set a self c!ean cycle during self clean cycle Oven was heavily soiled. • Cleon up heavy spillovers before starting the cleon cycle. Heavily soiled ovens may need to self-cleon again or for o longer period of time. The OVEN TEMP knob has not been set to CLEAN when the latch was moved to the right. • Set the OVEN TEMP knob to CLEAN. See the Using the self-cleaning oven section. The latch was not moved to the • Hove the latch to the right as for as it will go. See the right when the OVENTEMP knob Using the self-cleaning oven section. was set to CLEAN. A power interruption occurred. • Turn the OVEN TEMP knob to OFF ond move the Iotch to the left GsfGr os it will go. Reset the rGnge controls to the desired settings. See the Using the self-cleaning oven section. 34