Hotpoint RGB790SEHSA Owners Manual - Page 12
Using the oven controls., Oven Control, Clock and Timer Features and Settings
View all Hotpoint RGB790SEHSA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operating Instructions Safety Instructions Using the oven controls. Throughout this manual, features and appearance may vary from your model. Installation Instructions Consumer Support Troubleshooting Tips Oven Control, Clock and Timer Features and Settings (on some models) Bake/Temp Recall Pad Kitchen Timer On/Off Pad Touch this pad to select the bake function. Touch this pad to select the timer feature. Then Bake Light press the + and - pads to adjust the timer. Flashes while in edit mode-you can change the Kitchen Timer Light oven temperature at this point. Glows when the oven is in bake mode. Flashes while in edit mode-you can change the set time at this point. Glows when the timer has Start/On Pad Must be touched to start any cooking or cleaning been activated. Flashes again when the time has run out until the control is reset. function. Clock Pad Display Shows the time of day, oven temperature, whether the oven is in the bake, broil or selfcleaning mode and the times set for the timer To set the clock, press this pad twice and then press the + and - pads. The time of day will flash in the display when the oven is first turned on. or automatic oven operations. The display will Start Time Pad show PRE while preheating. When the oven reaches the selected temperature, the oven control will beep and the display will show the oven temperature. If "F- and a number or letter" flash in the display and the oven control signals, this indicates a function error code. Use along with the Cooking Time or Self Clean pads to set the oven to start and stop automatically at a time you set. Start Time Light Flashes while in edit mode-you can change the start time at this point. Glows when the function has been activated. If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset. The time of day will flash in the display when there has been a power outage. Reset the clock. Cooking Time Pad Touch this pad and then touch the + or - pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out. On models with an oven door latch, if the function error code appears during the self-cleaning cycle, check the oven door latch. The latch handle may have been moved, even if only slightly, from the latched position. Make sure the latch is moved to the right as far as it will go. Touch the Clear/Off pad. Allow the oven to cool Cooking Time Light Flashes while in edit mode-you can change the set time at this point. Glows when the function has been activated. Flashes again when the time has run out until the control is reset. for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power 12 to the range and call for service.