Huawei WATCH Ultimate User Guide - Page 37

Health Management Enabling/Disabling Automatic SpO2 measurement 1 Open the Huawei Health app, touch Devices then the name of your connected device, and enter its details screen. Touch Health monitoring, and enable/disable Automatic SpO₂. 2 Touch Low SpO2 alert to set the lower limit of your SpO2 for you to receive an alert when you are not asleep. Measuring your skin temperature Skin temperature measurements are mainly used to monitor the changes in the wrist skin temperature after exercise. After you enable a continuous skin temperature measurement, your skin temperature will be continuously measured and a measurement curve will be generated. • The product is not a medical device. Temperature measurements are mainly used to monitor the changes in the wrist skin temperature of healthy people over the age of 18 during and after exercise. Results are for reference only and should not be used as a basis for medical diagnosis or treatment. • During the measurement, wear the device relatively tightly for more than 10 minutes and stay in a relaxed environment at room temperature (about 25°C). Ensure that there are no water stains or alcohol on your wrist. Do not start a measurement in an environment with direct sunlight, wind, or cold/heat sources. • After you exercise, shower, or switch between outdoor and indoor environments, wait 30 minutes before you start a measurement. Single measurement In the watch's app list, go to Skin temperature to start measuring your temperature. Continuous measurement 1 Open the Health app, touch Devices and then the device name, go to Health monitoring, and enable Continuous skin temperature measurement. 2 In the watch's app list, touch Skin temperature to view the measurement curve. Healthy Living The Huawei Health app offers Healthy Living to help you develop healthy lifestyle habits and enjoy a healthy new life. 35