Hunter 20801 Owner's Manual - Page 6

7 • Completing Your Installation With or Without a Light Fixture Steps 7-1 - 7-3 Housing Assembly Screw 10 Upper Switch Housing Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. 7-6. Remove the switch housing cap and plug button. 7-7. the hole in the bottom on the lower switch housing. Use the lower switch housing. Securely tighten the nut and washer onto WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate. 7-8. 7-9. Remove the wire nuts from the two wires from the lower switch housing. Use one wire nut to connect the black wire from the light 7-2. Feed the upper plug housing. connector through the center opening 7of•thCeompleting Your 7-3. Align the keyhole slots in the housing with the housing assemInbslytallation With or white wire from the lower switch housing. screws. Without a Light Fixture CAUTION: Be sure no bare wire or wire strands are visible after 7-4. Turn the housing counterclockwise until the housing assemb(lCy ontinued) making connections. screws are firmly situated in the narrow end of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly. CAUTION: Make sure the upper switch housing is securely attached to the switch housing mounting plate. Failure to properly Light Fixture attach and tighten all three assembly screws could result in the Mounting Screws Lig switch housing and light fixture falling. Ass 7-5. If you want to install the light fixture, proceed with step 7-6 now. If you do not want to install the light fixture, proceed with step 7-10 now. Light Fixture Mounting Screw Step 7-4 Hunter Fan Company 42819-01 • 11/14/06 42819-01 • 11/14/06 Step Title witch using 11 Step 7-7 Hunter Fan Company