Hunter 23980 Owner's Manual - Page 7

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Make sure the power to the outlet box and associated wall switch location is still OFF. To connect the wires, hold the bare metal leads together and place a wire nut over them, then twist the wire nut clockwise until tight. CAUTION: Be sure no bare wire or wire strands are visible after making connections. Connect the wires as follows: • e bare or green ground wire from the ceiling to the green ground wire from the ceiling plate and the green ground wire from the fan • e white wire from the ceiling to the white wire from the fan • e black wire from the ceiling to the black wire from the fan 4-2. Push all wires and wire nuts into the outlet box. 4 • Wiring the Fan Wire Nut Single Switch Wiring 7 42405-01 • 01/20/06 Hunter Fan Company