Hunter 25748 Owner's Manual - Page 13
the mounting holes at the top of the switch housing line up
View all Hunter 25748 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8 • Completing Your Installation With or Without a Multi Staked Light Fixture (Cont.) Steps 8-6 - 8-9 Light Plug Connector Detail 8-11. Remove the receiver from the light kit. Receiver 8-12. Disconnect the light plug connectors between the black wire and the black/white wire. 8-13. Disconnect the light plug connectors between the two white Light Plug wires. Connectors 8-14. Install the dummy terminals (included in the hardware kit) on Light the two disconnected wires on the receiver. Kit 8-15. Place the receiver into the alternate switch housing. Making sure the mounting holes at the top of the switch housing line up with the matching slots in the top of the receiver. 8-16. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three #6-32 x 1/2" housing assembly screws. Housing Assembly Screw Steps 8-10 - 8-11 Plug Connector Detail 13 42419-01 • 11/24/08 • Hunter Fan Company