Hunter 28672 Owner's Manual - Page 10

5 • Installing the Canopy and Canopy Trim Ring 5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket. 5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy. 5-3. Twist canopy clockwise to secure. 5-4. Install third & fourth canopy screw in round hole on canopy. Securely tighten all four screws. 5-5. Using both hands, push the canopy trim ring up to the top of the canopy. 5-6. Twist canopy trim ring clockwise to secure the canopy. Steps 5-1 - 5-2 Canopy Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Hanger Bracket Canopy Trim Ring Step 5-4 Step 5-3 Step 5-5 Canopy Screw 10 45068-01 • 05/19/10 • Hunter Fan Company