Hunter 28672 Owner's Manual - Page 13

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) 7-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-7. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Installing the Glass Bowl 7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-9. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl. 7-10.S crew the finial onto the threaded rod end until tight. Steps 7-6 - 7-7 Plug Connector Lower Switch Housing Housing Assembly Screw for Light Bulbs (60 Watt Maximum) Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section. Metal Disk Metal Rod Glass Bowl Cover Plate Finial 13 45068-01 • 05/19/10 • Hunter Fan Company