Hunter 30547 Owner's Manual - Page 10

Operation Manual and Auto Operating Modes Your Hunter Air Purifier has two distinct operating modes - Manual and Auto. The Manual Mode allows you to override the control programs that have been set and to hold the settings until you adjust them. In Manual Mode, the automatic programs are not active. You select whether the unit is on or off and choose the blower speed. In Auto Mode, your air purifier is capable of running 4 separate programs for the weekdays and an additional 4 programs for the weekend. You can choose to have the same programs for every day or you can have different programs for the weekdays and the weekend. The air purifier is pre-programmed for all 7 days of the week as shown below. Refer to User Programming on pg. 16 for instructions on changing the programs. When using the remote, the air purifier remains in the mode that it is currently set for. Table 1: Pre-set Programming Provided for Each Air Purifier Program 1 2 3 4 Setpoint Time 8:00 am 3:00 pm 5:00 pm 10:00 pm Blower Speed 2 (Medium) 3 (High) 2 (Medium) 1 (Low) To switch between Manual and Auto Modes: 1. To change operating modes, press the AUTO key. The current operating mode will appear on the display (either AUTO or MANUAL). 2. When changed to Auto Mode, the unit will automatically adjust its controls to the appropriate program for the day and time. When Manual Mode is active, the unit will maintain current settings until you change them. Fig. 14 Auto Mode 41959-01 41959-01_3.30.06.pmd 10 10 Fig. 15 Manual Mode 3/30/06, 3:15 PM