Hunter 44550 Owner's Manual - Page 19
Manual Programming, Weekday/Weekend Programming
View all Hunter 44550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Manual Programming s Your thermostat can be programmed for weekdays and weekends, or have unique programs for all 7 days. Use Weekday/Weekend Programming below or 7-day Programming on page 21 to enter or revise programs to match your Personal Program Schedule. The same steps are used when entering programs for the first time, or revising programs entered during Auto Programming. s When batteries are first installed, the thermostat has all 4 programs set for 68°F (20°C) in Heat mode and 78°F (26°C) in Cool mode. NOTE: There are no energy saving time or temperature settings until the thermostat is Auto Programmed or Manually Programmed. s Familiarize yourself with Manual Programming, so that you can easily modify your programs as your comfort needs change. The example below demonstrates the Manual Programming method. Weekday/Weekend Programming NOTE: 1) The program time can be set in 10 minute increments, and remains the same for both Heat and Cool programs. 2) The program temperature can be set in increments of 1°F (1°C). 3) The Heat setpoint can not be set higher than the Cool setpoint, and the Cool setpoint can not be set lower than the Heat setpoint. 4) If the system selector is in AUTO mode, the current operating mode will be used for programming. 5) After 15 seconds without a key press, the thermostat will return to normal display mode. 6) When setting the program time, note the AM / PM indicator. 7) With the Auto Recovery feature enabled, you do not need to set your comfort program times early. Auto Recovery will determine how early to turn your system on, so that the room is comfortable at the program time. Step 1 COOL OFF HEAT AUTO s Slide System Selector Switch to HEAT or COOL to program the corresponding system. -- -- -- -- NOTE: If the system selector is in the OFF position, no programming is permitted. The LCD display will show only dashes when the program key is pressed.