Hunter 44660 Owner's Manual - Page 12

4 . Features (Cont.) Fahrenheit / Celsius You have the option of changing how your thermostat reports degrees between Fahrenheit and Celsius. To change this setting: Press the option button 3 times. Once on the Temp screen use the or to change between (F)ahrenheit and (C)elsius. Press ret/clear once you are finished or wait 15 seconds to return to the main screen. Language Selection Your thermostat gives you option of changing the language displayed. To change the language: Press the option once and use the or to select a new language. Press the ret/clear button or wait 15 seconds to return to the main display. LCD Brightness You can change the contrast of your display by adjusting the screen brightness. To change this feature: Press the option button 9 times and use the or to select a new display resolution. Press the ret/clear button or wait 15 seconds to return to the main display. Span The span setting regulates when and how long your system will run. The span has been set at the factory to 2 which will allow the system to turn on1oF (.05oC) above or below the set temperature and run for 1oF (.05oC) above or below the set temperature. If your thermostat is set to turn on at 72o in heat mode, with a span setting of 2, your thermostat will activate your furnace at 71o and shut it down when it reaches 73o. For cooling at 72o with a span of 2, your air conditioner will activate at 73o and shut down at 71o. This setting can be changed to 1, 2, or 3. 1 will shorten your running time while 3 will lengthen it. To change the span: Press the option button 5 times for span. Use the or to change the span number. Press the ret/clear or wait 15 seconds to return to the main display. 12 44008-01 • 02/10/10 • Hunter Fan Company