Hunter 90434 Owners Manual - Page 11

MAINTENANCE This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. This fan requires little maintenance and contains no user serviceable parts. DO NOT try to fix it yourself. Contact qualified service personnel if servicing is needed. Before cleaning, turn fan off and unplug from electrical outlet. Wipe off excess dust with a lintfree cloth. To ensure adequate air circulation to the motor, keep vents located at the rear of the motor free from dust accumulation. A vacuum cleaner hose can be used to clean these vents. DO NOT immerse the fan in water or any other liquid. CLEANING THE GRILL AND BLADE: 1. Turn the fan off and unplug from the electrical outlet. 2. Disassemble the grills by loosening the screw holding the grill ring and remove it from the grills. 3. Two tabs hold the front grill and back grill together. Pull the front grill from the back. 4. The blade may be removed by loosening the screw holding it in place. Grills and blades may be cleaned with mild soap and water only after they have been removed from the motor housing. 5. Use a dry or slightly damp lint free cloth to clean the fan. Do not use a furniture polish or any other cleaners that leave any residue, as they will damage the protective Dust Armor. 33Use a soft, slightly damp cloth to wipe the remaining fan parts. 33DO NOT allow water or any other liquid to get into the motor housing or base. 33Reassemble the fan after blades and grills have dried completely. 33DO NOT plug the fan into an electrical outlet until it has been fully reassembled. ©2011 Hunter Fan Co. 11 44827-01 20111013