Hunter 90434 Owners Manual - Page 5

GROUNDING This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet. WARNING This unit is suitable for grounded receptacle use only. Grounded Plug Grounding Pin Grounded Outlet Box Cover The power cord has a grounded plug as shown in Figure 1, and must be used with an electrical outlet that can accommodate the grounding pin. If your electrical outlet can not accommodate the grounding pin, then you must purchase and install one of the two types of adapters shown in Figure 2. NOTE: The adapters ARE NOT supplied with this fan. Read, follow, and save the instructions that are included with the adapter you choose. Do not use an adapter if your electrical outlet can accommodate the grounding pin. LINE CORD SAFETY TIPS 1. NEVER pull or yank on the cord or the appliance. 2. To insert plug, grasp it firmly and guide it into the outlet. 3. To disconnect the appliance, grasp the plug and remove it from the outlet. 4. Before each use, inspect the line cord for cuts and/ or abrasion marks. If any are found, the appliance should be serviced and the line cord replaced. Please return it to our Service Department or to an authorized service representative. 5. NEVER wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and could cause it to fray and break. 6. DO NOT operate appliance if the line cord shows any damage, if the appliance works intermittently or stops working entirely. Figure 1 Adapter Metal Screw Grounding Means Grounded Outlet Box Cover Figure 2 ©2011 Hunter Fan Co. 5 44827-01 20111013