Hunter 90434 Owners Manual - Page 8

GRILL ASSEMBLY 1. Remove the plastic hub cap from the motor housing. Figure 9. 2. Place the back grill against the motor housing, Figure 10., and line up the two black tabs on the front of the motor housing. Caution: Make sure the handle on the back of the back grill is at the top. 3. Attach the back grill and secure it to the motor housing with the plastic hub cap. Figure 11. 4. Loosen the pre-installed screw on the back of the fan blade, and slide the fan blade onto the post on the motor housing. Figure 12. 5. Retighten the screw on the back of the fan blade to secure it to the motor housing. Figure 12. Motor Housing Plastic Hub Cap Handle Back Grill Figure 9 Caution: Ensure when tightening the screw on the back of the fan blade, you tighten it on the flat part of the post. Motor Housing Figure 10 Plastic Hub Cap ©2011 Hunter Fan Co. Figure 11 Post Screw Fan Blade Figure 12 8 44827-01 20111013